 |
|
||
|
|||
|
|
||
|
|||
Hints and Things does not use any 1st Party cookies - more information .
How To Descale Your Magimix
Turn off machine and unplug from socket.
Take
off the capsule cage & frothing attachment Using tool & capsule holder provided.
Put these items into a pint of water; include the capsule holder but not the plastic tool, & add one cleaning tablet. Soak for 1 hour.
Be
careful not to lose the following. Put these all in the solution.
Meanwhile
put 1 pint of water into water tank and add 30 mls of Nilscale.
Plug
in machine, turn on power at plug only, for
M300, Robot café & l`expresso,
Which are automatically descaling machines. You will need to read your instruction manuals. For all other models turn on at machine. Run machine as if making coffee without capsule holder or cage in. into a cup or suitable container run ˝ a cup through. Run steam side of machine on water not steam without frothing attachment into a cup. Until cup is ˝ full. Stop this function. Switch off machine and leave for 15 minutes. Repeat this cycle (1/2 cup-1/2 cup leaving to stand for 15 minutes) until all solution has gone from water tank. Wash water tank with soapy water, rinse, and fill with clean fresh water. Take frothing nozzle etc. from cleaning fluid, wash in soapy water and rinse. Now you are ready to put the capsule cage back into the machine.
replace capsule cage using tool and capsule holder.
Then
take frothing nozzle, if end blocked clean with needle, not this
Put onto end of steam tube. Start machine again and run 2 cups of water through steam nozzle. Then run 2 cups of water through the capsule cage.
Finished ,you will need to do this once a month to keep machine working as new.
Copyright © 2000-2020 Hints and Things cannot be held responsible for any information given on this site nor do they necessarily agree with, or endorse, the views given by third parties. |
+
or
+
or
Put this on top of the spring this way up.
Then put spring on top of capsule cage,
if this is blocked
, put o-ring
on top of capsule cage at thread.
tool, as it will make the hole to big.